Poly Aluminium Chloride

Introduction

PAC POWDER

HS Code : 28273200 | CAS NO. : 1327-41-9

Packing : HDPE Bags | HDPE Jambo Bags | HDPE Drum

---

PAC LIQUID

HS Code : 28273200 | CAS NO. : 1327-41-9 | UN NO. : 3264 | HAZ CLASS : 8

Packing : IBC Tanks

PAC is modern coagulant widely used for removal of suspended particle from raw water & convert into clean water for human consumption and industrial usage.

It is a very effective chemical for water treatment and displaced traditional products like aluminium sulfate, ferric chloride, ferrous sulphate, iron chloride during the last fewsss years due to its higher efficiency at lower dosage.

It is inorganic compound and mainly classified into on the basis of sulphate content present.

Major Use & Application

• Use as Coagulant in Water Treatment Plant - Transform the Turbid water to crystal clear water by removing the colloidal and suspended particles.
• Use as Coagulant in Wastewater Treatment Plant of different Industries - Use for removal of COD, BOD, PAC TSS in influent water of different industries
• Use in Paper Sizing - Used as a rosin sizing control in Neutral and alkaline paper production affects the Drainage of liquor from the paper. PAC is useful as a fixative to control anionic substances and as a retention / drainage aid.

Advantages of PAC over convectional coagulant (like Alum)

• Wide variety of formulations
• PAC reacts faster and perform better than alum because of its polymeric structure which allows a higher coagulation efficiency
• The formed flocs are bigger
• Remains effective over a wider turbidity range and even at very low temperatures
• Lower quantities of residual aluminium in water
• Generally no need of alkalinity addition
• Lower doses are required in comparison with alum
• Efficient over a larger pH range
• Less sludge production compared to the other coagulants
• Free from contaminants like heavy metals